EQUIPMENT SALES & SERVICE: 800-246-6013

CALL NOW

Search by Part, SKU, or Keyword:

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Lodar 2 Function FET Receiver/Air Actuator + Standard Transmitter

Home » Store » Lodar 2 Function FET Receiver/Air Actuator + Standard Transmitter

Need assistance?

Text or Call our direct parts line.

Lodar 2 Function FET Receiver/Air Actuator + Standard Transmitter2020-12-10T16:18:32-05:00

Lodar 2 Function FET Receiver/Air Actuator + Standard Transmitter

$779.99

Lodar 2 Function FET Receiver/Air Actuator + Standard Transmitter NOTE: This is for trucks that are fitted with an air compressor"Two Functions" means two directions of a single action, such as winch in and out.  Operate your hand lever controls with Lodar’s actuator series. An air compressor with at least 110-120 psi is required for proper operation. This Lodar 2 function system features FETS, wide band, standard output, standard transmitter and an integrated actuator system. Five year pro-rated warranty.

INCLUDES

  • 1 x Standard Transmitter
  • 1 x Air Actuator
  • 1 x Actuator Receiver with Wiring Harness and Glands
  • 1 x Lo-Cover
  • 1 x Lanyard
  • 1 x Instructions

ACTUATOR SPECIFICATIONS

FEATURES

Soft-Start | a flow control valve in the supply line allows adjustment of the air supply into cylinder, hence the speed at which it moves. This gives a degree of “feel” to the system when “inching” equipment, without restricting the exhaust flow from the cylinder but also allowing immediate shut off.
Manual over-ride | this is available at all times. At rest, both pipes to the cylinder are “open to atmosphere”, allowing for free movement of the piston, with return to center when the system is deactivated.

ASSEMBLY

Air Cylinder(s) 32mm(1.25″) bore x 50mm(2″) stroke Fitted with trunnion and clevis, with lug(s) ready for welding 2 push fit elbows per cylinder

CONTROL BOX

Radio Receiver with outputs to valves – prewired
Flow control valve
3ft lengths of output pipe with push fit connections to the cylinder(s) – color coded for each pair of functions.
6ft length blue supply pipe fitted with 1/4″ adaptor (push fit)
8ft twin core power supply cable

STANDARDS

Max air pressure120psi
Air requirementsMust be CLEAN and DRY (air flow is minimal)
Max push149 lbs @120psi
Max pull128 lbs @120psi
Voltage12 and 24 Volts available (24 Volt systems are suffixed 24 – e.g. 92 1 50/24 etc)
 

TRANSMITTER SPECIFICATIONS

SWITCH TYPE

TypeTactile Dome

BATTERY

Type9V Alkaline Manganese (GP 1604A – JIS 6LF22 – IEC 6LF22 – Eveready 522 – Duracell MN1604)

CURRENT DRAW

Quiescent15 micro amps
Operating20 milliamps

PROTECTION

IP Rating55
Registration codesOver 16 million

PERFORMANCE

Temp Range-10o C to + 40o C (13o F to + 104o F)
Range Nominal60 meters (200 ft) from the Receiver, when driving a momentary output without signal drop out
Transmitted power1 mW Typical

COMPLIANCE

EMCExceeds ETSI 300 220. Compliant E11 10R-037601
ModulationFM
Frequencies418.00 MHz F1D  USA (optional UK)
433.92 MHz F1D World wide (optional USA)
 

RECEIVER SPECIFICATIONS

SWITCH TYPE

Output SwitchingMOS Field Effect Transistor (P Channel Power MOSFET)

SUPPLY VOLTS

Nominal12/24 Volts DC
Absolute Maximum40 Volts DC
Minimum8 Volts DC
Output Switch SupplyInternal 12/24 Volts

AMPS

FET Rating15 Amps
System Rating15 Amps
Quiescent Current25 mA on Standby (Not SET)
Overload Protection15 Amps (Auto Shutdown)

AERIAL

Internal AntennaYes Supplied and fitted
External AntennaOptional See Accessories    Aerial Kit with 3 m Coax (9863)

OUTPUTS

Master1   Can be Parallel or Continuous.
Function2

PERFORMANCE

Simultaneous OutputsYes   With horizontal interlocks (Interlocks are programmable)
Instant TX responseYes   No perceivable delay between TX operation and RX action

DIAGNOSTICS

LED’sYes   Confirm 5 Volts, SET, Fault and all Outputs.

PROTECTION

ESR SafetyYes   See ESR Safety document
Back EMFYes   Diode protected on all outputs
Registration codesYes   Over 16 million
STOP ConnectionYes   Internal Emergency Stop Connection.

WIRING

Wiring LoomYes   3 meters (10ft) supplied and fitted
Cable GlandYes   Supplied and fitted
ConnectionsScrew terminal into plug and socket on PCB, for easy “swap out”

ENCLOSURE

Weight0.3 lbs (335gms)
LidSmoke PVC – to view LEDs
BaseBlack PVC
BreatherGortex fitted in base
Mounting4 external lugs
Fixings5mm (3/16”) not supplied
IP RatingPerforms to IP67 standard (0.5 meter water for 1 hour)

Brand

Lodar

Lodar Ltd is an industry leader in the design and production of Industrial Wireless Remote Controls. Since 1984, the team at Lodar has reinvented and developed the radio remote system to suit the needs of working companies and individuals. We believe quality and excellence should come as standard. Bressler's, Inc. is one of only two Lodar distributors in Pennsylvania.

Reviews

There are no reviews yet.

Be the first to review “Lodar 2 Function FET Receiver/Air Actuator + Standard Transmitter”