Boom Structural Rating (S.A.E.)
35 TON
Underlift Tow Rating:
35,000 lbs.
Winch Rating & Wire Rope:
35,000 lbs.
Vulcan V-70 Heavy Duty Wrecker
Innovation in Heavy-Duty Integrated Towing and Recovery Equipment
For the right mix of power, performance and value, Vulcan’s V-70 is the intelligent choice for heavy duty integrated towing and recovery equipment. Vital components are fabricated from high yield steel to minimize weight to allow for more legal payload while maximizing strength and durability. Now available with an optional 3rd winch, the V-70 now has even greater recovery capabilities.
The hydraulic components are engineered at the heart of the unit to provide the power to the winches, boom and underlift to handle the most demanding jobs. The patented double action tilt system is just one of the features that exemplifies Vulcan’s superior design with the ability to tilt a full 16,000 lb under load. At Vulcan, we believe that your equipment is only as good as its weakest component, so we take a total design approach to assure your V-70 is the most intelligent choice you can make for years of trouble free service.
Features:
Standard:
- Dual Control Stations with Direct Link Activated Levers
- Pressure Gauges
- Hour Meter
- Hydraulic Pump
- Independent Hydraulic Rear Spades
- Pavement Pads (n/a with Flipper Feet)
- Tailboard D-Rings
- Safety Chain in Rear Pockets
- Tailboard Fork & Tie-Down Chains
- Tailboard Recovery Anchors
- Air & Electric Hook Up
Boom:
- Power Elevation
- Power Extension
- 360° Sheave Heads
- Cable Tie Backs
- Spherical Bearings in Main Boom
- Dual 2-Speed Planetary Winches
- Cable Tensioners
- Winch Air Free Spool
Underlift:
- Patented Power Tilt
- Hydraulic Fold
- 3-Stage Design
- 12 FXN Wireless Remote Control with Charging/Docking Station
- Low Profile 70° Pivoting Heavy Duty Fabricated Cross Bar
- Low Profile Fork Holders
- Pivoting Spring Lift Adaptors
- Chain Hook End Caps
- 9 Sets of Cast Steel Forks: Short Axle Fork, 3” Short, 3” Medium, 3” Tall, 4 1/2” Short, 4 1/2” Medium, 4 1/2” Tall, 6” Short Offset, Round Axle Fork
- King Pin Tow Plate
Body:
- Aluminum Modular Body w/Rubber Mounting Isolators
- LED Body Lighting
- LED Tool Compartment Lighting
- Gas Door Shocks
- Chrome Double Action Latches with Keyless Lock and Unlock
- Adjustable Shelves
- Lift Fork Storage
- Chain Storage
- Aluminum Tread-Plate Walkway
- Mud Flaps
Optional:
- Air Shift PTO
- Additional Lighting
- Poly-Bilt Body
- Side Work Lights
- MMO Power Distribution
- Chain Package
- Light Pylon
- 22,000 lb Under Boom Auxilary Winch
- Euro Stinger—144”
- Endless Loop Sling Package
- Multi-Positional Flipper Feet
- Screw Pin Shackle Kit
- Rear Outrigger – Horizontal
- Spreader Bars
- Heavy Duty Tire Lift
- Tailboard Underlift Controls
- Tire Lift Storage Brackets
- 3 or 4 Drawer Toolbox
- Fork Risers
- Snatch Blocks
- Pintle Hook Attachment
- Wide Load Light Bar
- 5th Wheel Plate (requires Pintle Hook Attachment)
- Dual Camera & Monitor
- King Pin Attachment (requires Pintle Hook Attachment)
- Convenience Groups
- Trailer Ball Adapter (requires Pintle Hook Attachment)
- Aluminum Dress-Up Kits
- Additional Lift Forks
- Installation
- Underlift Light Kit (LED)
- Water Tank Kit
Specifications:
Boom | ||
---|---|---|
Boom Structural Rating (S.A.E.) | Retracted 30° | 70,000 lbs. |
Boom Structural Rating (S.A.E.) | Extended 30° | 28,000 lbs. |
Boom Angle | 35° | |
Maximum Hook Height | 233” | |
Hydraulic Boom Extension | 120” |
Winch Rating & Wire Rope | ||
---|---|---|
Main Winch | Auxiliary 3rd Winch | |
Winch Capacity | 35,000 lbs. | 22,000 lbs. |
Winch Type | Dual Planetary Winch | Planetary Winch |
Cable Specifications | 3/4” x 200’ | 5/8″ x 150′ |
Cable Type | 6X37 I.W.R.C. | I.W.R.C. |
Underlift | ||
---|---|---|
Feature | V-70 Standard | V-70 Euro-Stinger |
Capacity Fully Extended to C.L. of Forks | 16,000 lbs. @ 116” | 16,000 lbs. @ 144” |
Capacity Fully Retracted to C.L. of Forks | 35,000 lbs. @ 60” | 35,000 lbs. @ 67” |
Underlift Tilt | 18° | 18° |
Tow Rating | 80,000 lbs. | 80,000 lbs. |
Body | ||
---|---|---|
Feature | V-70 Tandem Axle | V-70 Tri Axle |
Common Body Configuration | 160” C.B. | 180” C.B. |
Additional Body Configuration | 180” / 200 ” / 220” C.B. | 200” / 220 ” C.B. |
Recommended Minimum* Chassis Specifications | ||
---|---|---|
Front Axle | 13,200 lbs. | |
Rear Axle | 40,000 lbs. | |
Clear C.A. / C.B. | 156” – 220” C.A. | |
After Frame from Center of Rear Axle | 36” | |
RBM | 3,000,000 in/lbs. |
*All recommendation are minimums, heavier specifications may be required depending on chassis and equipment weight. Consult our sales staff for additional information and to pick the perfect chassis for this truck.
Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. or Bressler’s, Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.
*MSRP listed is Miller Industries’ Suggested Retail Price for the body/equipment only. Amount shown does not include discounted sale price, chassis, installation, options, accessories, paint, freight, delivery, federal and local tax, state safety and emissions inspection, etc. All prices are subject to change without prior notice. For accurate quote on this or any equipment, please contact our sales department.
BUILT HERE.
BUILT RIGHT.
BUILT FOR YOU.
BRESSLERS BUILDS IT BETTER.
Bressler’s, Inc. builds American-Made wreckers, rollbacks and rotators, tailored to our customers’ individual needs. Check out these previous customer builds.
VIEW TRUCKS SIMILAR TO THIS Vulcan V-70 Heavy Duty Wrecker

Michael Hunt
Wrecker Salesman
Interested in purchasing a Vulcan V-70 Heavy Duty Wrecker?
Buying a new Vulcan V-70 Heavy Duty Wrecker can be a daunting task. Our equipment sales staff has decades of experience helping customers like you make smart choices when it comes to chassis choice, truck specification, and picking the right options and accessories to get the job done.
Fill out the form below to reach out to our equipment sales staff. You can also Call Us or Send Us a Text.
Financing Available
We have long-term relationships with several finance partners who understand the unique characteristics of the towing and recovery industry. Interest rates on new wreckers are at an all-time low.
Enter your e-mail address below to explore finance options for your next towing equipment purchase. We do not sell your information, and will not run a credit check without your approval.