Vulcan V-100 Heavy Duty Wrecker

Home » Portfolio » Vulcan V-100 Heavy Duty Wrecker

*MSRP:

$237,500

Boom Structural Rating (S.A.E.)

50 TON

Underlift Tow Rating:

55,000 lbs.

Winch Rating & Wire Rope:

50,000 lbs.

Vulcan V-100 Heavy Duty Wrecker

Innovation in Heavy-Duty Integrated Towing and Recovery Equipment

Almost two decades ago, Vulcan became a pioneer in the heavy-duty integrated towing and recovery market with the introduction of the Vulcan 940 and then continued its advancement in equipment technology with the Vulcan 3025. Now available with an optional 3rd winch, the V-100 now has even greater recovery capabilities.

The V-100 is just one more example of Vulcan’s continued pursuit in providing the most innovative equipment to meet the demands of professional heavy-duty operators.Toolbox compartments with keyless entry, 2-speed winches, the Euro-lift stinger with a 144” of reach and a 3-stage recovery boom providing over 25 feet of boom elevation are just a few of the many standard and optional features that have continued Vulcan’s legacy as the innovator …. Not the imitator.

Features:

Standard:

  • Dual Control Stations with Direct Link Activated Levers
  • Pressure Gauges
  • Hour Meter
  • Hydraulic Pump
  • Independent Hydraulic Rear Spades
  • Pavement Pads (n/a with Flipper Feet)
  • Tailboard D-Rings
  • Safety Chain in Rear Pockets
  • Tailboard Fork & Tie-Down Chains
  • Tailboard Recovery Anchors
  • Air & Electric Hook Up

Boom:

  • Power Elevation
  • Power Extension
  • 360° Sheave Heads
  • Cable Tie Backs
  • Spherical Bearings in Main Boom
  • Dual 2-Speed Planetary Winches
  • Cable Tensioners
  • Winch Air Free Spool

Underlift:

  • Patented Power Tilt
  • Hydraulic Fold
  • 3-Stage Design
  • 12 FXN Wireless Remote Control with Charging/Docking Station
  • Low Profile 70° Pivoting Heavy Duty Fabricated Cross Bar
  • Low Profile Fork Holders
  • Pivoting Spring Lift Adaptors
  • Chain Hook End Caps
  • 9 Sets of Cast Steel Forks: Short Axle Fork, 3” Short, 3” Medium, 3” Tall, 4 1/2” Short, 4 1/2” Medium, 4 1/2” Tall, 6” Short Offset, Round Axle Fork
  • King Pin Tow Plate

Body:

  • Aluminum Modular Body w/Rubber Mounting Isolators
  • LED Body Lighting
  • LED Tool Compartment Lighting
  • Gas Door Shocks
  • Chrome Double Action Latches with Keyless Lock and Unlock
  • Adjustable Shelves
  • Lift Fork Storage
  • Chain Storage
  • Aluminum Tread-Plate Walkway
  • Mud Flaps

Optional:

  • Air Shift PTO
  • PolyBilt Body
  • MMO Power Distribution
  • Light Pylon
  • Euro Stinger – 144” (V70/V-100 only)
  • Multi-Position Flipper Feet
  • Rear Outrigger
  • Heavy Duty Tire Lift
  • Tire Lift Storage Brackets
  • Fork Risers
  • Pintle Hook Attachment
  • 5th Wheel Plate (Requires Pintle Hook Attachment)
  • King Pin Attachment (Requires Pintle Hook Attachment)
  • Trailer Ball Adapter (Requires Pintle Hook Attachment)
  • Additional Lift Forks
  • Underlift Light Kit (LED)
  • Additional Lighting
  • Side Work Lights
  • Chain Package
  • Endless Loop Sling Package
  • Screw Pin Shackle Kit
  • Spreader Bars
  • Tailboard Underlift Controls
  • 3 or 4 Drawer Toolbox
  • Water Tank Kit
  • Snatch Blocks
  • Wide Load Light Bar
  • Dual Camera & Monitor
  • Convenience Groups
  • Aluminum Dress Up Kits
  • Installation
  • 22,000 lb Under Boom Auxilary Winch

Specifications:

Boom 3-Stage
Boom Structural Rating (S.A.E.)Retracted 35°100,000 lbs.
Boom Structural Rating (S.A.E.)Extended 35°18,000 lbs.
Boom Angle35°
Maximum Hook Height304”
Hydraulic Boom Extension216”
Winch Rating & Wire Rope
Main WinchAuxiliary 3rd Winch
Winch Capacity50,000 lbs.22,000 lbs.
Winch TypeDual Planetary WinchPlanetary Winch
Cable Specifications3/4” x 250’5/8″ x 150′
Cable Type6X37 I.W.R.C.I.W.R.C.
Underlift
FeatureV-100 StandardV-100 Euro-Stinger
Capacity Fully Extended to C.L. of Forks18,000 lbs. @ 116”18,000 lbs. @ 144”
Capacity Fully Retracted to C.L. of Forks55,000 lbs. @ 60”55,000 lbs. @ 67”
Underlift Tilt18°18°
Tow Rating80,000 lbs.80,000 lbs.
Body
FeatureV-100 Tandem AxleV-100 Tri Axle
Common Body Configuration160” C.B.180” C.B.
Additional Body Configuration180” / 200 ” / 220” C.B.200” / 220 ” C.B.
Recommended Minimum* Chassis Specifications
Front Axle14,600 lbs.
Rear Axle40,000 lbs.
Clear C.A. / C.B.156” – 220” C.A.
After Frame from Center of Rear Axle36”
RBM3,000,000 in/lbs.

*All recommendation are minimums, heavier specifications may be required depending on chassis and equipment weight. Consult our sales staff for additional information and to pick the perfect chassis for this truck.

Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. or Bressler’s, Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.

*MSRP listed is Miller Industries’ Suggested Retail Price for the body/equipment only. Amount shown does not include discounted sale price, chassis, installation, options, accessories, paint, freight, delivery, federal and local tax, state safety and emissions inspection, etc. All prices are subject to change without prior notice. For accurate quote on this or any equipment, please contact our sales department.

VIEW TRUCKS SIMILAR TO THIS Vulcan V-100 Heavy Duty Wrecker

Equipment IN STOCK NOW:

Title