Vulcan 20 Series LCG Industrial Carrier



Carrier Load Rating

20,000 lbs

Wheel Lift/Tow Bar Rating:

4k-6k lbs.

Winch Rating & Wire Rope:

12k-20k lbs.

Vulcan 20 Series LCG Industrial Carrier

The 20 Series LCG™ Carrier uses a patented subframe design that lowers the deck 4” to 6” compared to most industrial carriers. The lower deck provides:

  • Increased Load Stability with Lower Center of Gravity
  • Lower Load Angle
  • The Ability to Transport Taller Loads
  • The Ability to Secure the Load with feet on the Ground

The 20 Series LCG™ is designed for a chassis with either Single or Tandem Rear Axles and Dual Rear Wheels. Deck Lengths are available from 24’ to 30’.



  • Full Length Subframe
  • Dual Bed Extension Cylinders
  • Full Length Subframe Wear Pads
  • Roller Bed Positive Lock-down
  • Painted w/Black Acrylic Urethane
  • Dual Illuminated Controls
  • Driver & Passenger Side Chain Trays
  • Back-Up Alarm
  • L.E.D. Lights
  • Hydraulic Dock Stablizer
  • Hydraulic Pump
  • Mud Flaps
  • 7 Tie-Down Points (2 front, 5 rear)
  • Federal Standard 108 Lighting
  • Floor Level Sides, w/Stake Pockets
  • 20,000 lb Planetary Winch
  • Two Front Safety Chains
  • 3/16” Deck Plate
  • Bed Anti-Tilt Feature
  • Winch Air Clutch Release
  • Dual Tilt Cylinders
  • Cable Tensioner


  • Combination Wheel Lift & Dock Stablizer 4,000 lb Wheel Lift
  • Combination Wheel Lift & Dock Stablizer 6,000 lb Wheel Lift   (Requires Tandem Rear Axle or Longer CA)
  • Combination Hydraulic Ext. Pintle & Dock Stabilizer
  • Removable Side Rails
  • Locking Chain Rack  (For Bed Mounted Cab Protector)
  • Stabilizer Spades
  • Industrial Floor Level Sides With 24” O.C. Chain Locks
  • Window Guard in the Cab Protector
  • Bolt On Winch Guard
  • Tool Compartments
  • Switch Panel
  • PTO
  • Work Area & Emergency Lighting
  • Smooth Floor in Lieu of Deck Plate
  • Optional Color On Top of Deck & Side Rails
  • 1/4” Steel Floor (Smooth or Deck Plate)
  • Wireless Winch Remote
  • Apitong Wood Floor
  • 15,000 lb Planetary Winch
  • Rumber Flooring
  • 12,000 lb Planetary Winch
  • Additional Key Slots
  • Galvanized Subframe
  • Dual Row Key Slots Down Center of Deck
  • Trailer Ball Kit For the Wheel Lift (4,000 lb)
  • Bed-Mounted Cab Protector
  • Fork Holders & Lift Forks for the Underlift
  • Frame Mounted Pylon (Requires 6”, 8”, or 12” Additional CA Depending on Pylon Choice)
  • Pintle Hitch Adapter for the Underlift
  • Passenger Side or Dual Air Free Spool


Load Rating20,000 lb
Deck Height Above Chassis FrameSteel7 3/4”
Deck Height Above Chassis FrameWood8 3/4”
Platform Length24’, 25’, 26’, 27’, 28’, 29’, 30’
Platform Floorplate Thickness3/16”
Platform WidthOutside102”
Platform WidthInside*97”
Platform Mainbeam6” I-Beam
Crossmembers3” x 3” Corten Tube
Crossmember Spacing8” on Center
Body Sides6” x 4” x 3/8” Angle
Subframe Rails5” x 3” x 1/2” H.S. Tube
Cable12,000 lb Winch7/16” x 50’
Cable15,000 lb Winch1/2” x 50’
Cable20,000 lb Winch9/16” x 75’
Bed Tilt Cylinders4” Bore
Bed Extension Cylinders (2)3 1/2” x 120” Stroke
Wheel Lift RatingExtended4,000 lb – 6,000 lb
Tow Rating10,000 lb – 20,000 lb
Chassis Recommendations
ComponentSingle Rear AxleTandem Rear Axle
Minimum GVRW31,000 lb50,000 lb
Frame Height38” – 43”38” – 43”
Minimum Frame RBM, 24’ – 28’1,800,000 in/lb
Minimum Frame RBM, 29’ – 30’2,100,000 in/lb
Minimum Frame RBM2,500,000 in/lb
Minimum C.A., 24‘166” (174” with Lift Axle)
Minimum C.A., 25’170” (178” with Lift Axle)
Minimum C.A., 26’182” (190” with Lift Axle)174”
Minimum C.A., 27’194”182”
Minimum C.A., 28’206”190”
Minimum C.A., 29’198”
Minimum C.A., 30’206”
Minimum Frame Length Behind Center of Rear Axle34”54”

Fuel tanks must be under the cab and not to extend behind front of the bed. Fuel tanks can extend up to 6 inches behind the cab only in combination with a frame mounted pylon. Fuel fill must not be behind the cab. The preferred location for the battery box is under the passenger seat or under the cab. Battery boxes in other locations may require relocation. Chassis components directly behind the cab must be 2 inches below the top of the truck frame to clear the bed rails. Air tanks in the tilt cylinder zone will need to be relocated.

* Inside bed widths will vary based on side rail option selected.

Minimum space of 49” required between the inside tires. Tire 275/70R 22.5 and above require aluminum inside wheels. 295/75 R 22.5 are preferred.

Rear frame height should equal rear tire height.

Air bag rear suspension is recommended for lower load angle.

Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. or Bressler’s, Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.

*MSRP listed is Miller Industries’ Suggested Retail Price for the body/equipment only. Amount shown does not include discounted sale price, chassis, installation, options, accessories, paint, freight, delivery, federal and local tax, state safety and emissions inspection, etc. All prices are subject to change without prior notice. For accurate quote on this or any equipment, please contact our sales department.

VIEW TRUCKS SIMILAR TO THIS Vulcan 20 Series LCG Industrial Carrier

Equipment IN STOCK NOW: