Carrier Load Rating
20k-30k lbs
Wheel Lift/Tow Bar Rating:
3,500-5000 lbs.
Winch Rating & Wire Rope:
8k-20k lbs.
Vulcan 20 & 30 Series Industrial Carrier
Deliver with Confidence
Vulcan’s 20 & 30 series carriers have long set the industry standard for hauling heavy equipment. At Vulcan, we believe that providing you with the best equipment with a variety of options allows you to customize your equipment for your needs.
Options such as: various deck lengths, apitong flooring, container packages, and additional key slots make your hauling and load combinations virtually unlimited. In addition, our durable design provides you with the comfort of knowing that your equipment will be reliable for years to come.
Features:
Standard:
- Consolidated Tilt & Full Length Mounting Frame
- Full Length Nylatron Slide Pads
- Painted w/Black Acrylic Urethane
- Driver’s & Passenger Side Chain Trays
- Two Front Safety Chains
- Positive Lock-Down System
- Hydraulic Winch & Cable
- Dual Illuminated Controls
- Winch Clutch Release
- Back-Up Alarm
- Bed Anti-Tilt Feature
- Hydraulic Pump
- Dual Lift Cylinders
- Mud Flaps
- One Extension Cylinder
- Federal Standard 108 Lighting
- Hydraulic Dock Stabilizer
Standard – 20 Series Only:
- Winch Cable Tensioner
- Six Tie-Down Points (2 Front, 4 Rear)
- Slide in L-Arms
- Safety Chains
- Wheel Straps
Standard – 30 Series Only:
- 20,000 lb Planetary Winch with Air Free-Spool
- 6” on Center Crossmember Spacing
- 12 Tie-Down Points (4 Per Side, 4 Rear)
- Steel Tube Cab Protector
Optional:
- Removable Side Rails
- Wire Mesh in the Cab Protector
- Outside Stake Pockets w/Rub Rails & Pipe Spools
- Aluminium Chain Trays (for Stationary Cab Protector)
- Tool Compartments
- Locking Chain Rack
- PTO
- Drop Wheel Wells on Deck
- Smooth Floor in Lieu of Diamond Plate
- Switch Panel
- 1/4” Steel Floor
- Work Area & Emergency Lighting
- Apitong Wood Floor
- Optional Color on Top of Deck & Side Rails
- Rumber Floor
- Winch Cage
- Dual Key Slots Down Center or Deck Edge
- Wired or Wireless Winch Remote
- Additional D-Rings
- Winch Bumper Stops
- Stationary Cab Protector (Requires 10” Additional CA)
Optional – 20 Series:
- Steel Tube Cab Protector
- Independent Hydraulic Stabilizer in Lieu of Wheel Lift
- 6” On Center Crossmember Spacing
- Heavy Duty Build-Up Kit (Includes Additional Crossmembers & 5” Lift Cylinders)
- 12,000 lb Worm Gear Winch
- 12,000 lb or 20,000 lb Planetary Gear Winch
- Trailer Ball Kit for Independent Wheel Lift
Vulcan 20 & 30 series decks are available with an optional Apitong wood floor, in place of the standard diamond steel floor plate. Optional dual row key slots down the center of the floor, as well as key slots and lashing rings along the deck edge, also available.
Specifications:
| Carrier | ||
|---|---|---|
| Component | 20 Series | 30 Series |
| Load Rating | 20,000 lb | 30,000 lb |
| Platform Length | 24’, 26‘, 28’, 30’ | 24’, 26‘, 28’, 30’ |
| Platform Thickness | 3/16” | 3/16” |
| Platform Width (Outside) | 102” | 102” |
| Platform Width (Inside) | 98” | 98” |
| Platform Mainbeam | 6” I-Beam | 8” I-Beam |
| Platform Crossmembers | 2” x 4” Cor-ten Steel | 2” x 4” Cor-ten Steel |
| Crossmember Spacing | 8” on Center | 6” on Center |
| Platform Sides | 7” x 4” Angle w/ 24” C/C Pockets | 7” x 4” Angle w/ 24” C/C Pockets |
| Subframe | 5” x 4” x 3/8” Tube | 7” x 4” x 3/8” Tube |
| Rear Pivot | 1 Piece 2” Diameter | 1 Piece 2” Diameter |
| Winch (First Layer) | 8,000 lb Worm Gear | 20,000 lb Planetary Gear |
| Cable | 3/8” x 50’ | 9/16” x 100’ |
| Power Lift Cylinders | 4 1/2” x 32” Stroke | 5” x 32” Stroke |
| Extension Cylinder | 4 1/2” x 120” Stroke | 5” x 120” Stroke |
| Wheel Lift Rating | 3,500 lb | Not Applicable |
| Optional Tow Bar Rating | 5,000 lb | Not Applicable |
| Chassis Recommendations – 20 Series Single Axle | ||
|---|---|---|
| Minimum GVRW | 50,000 lb | |
| Minimum C.A. (Clear) | 24’ | 162” |
| Minimum C.A. (Clear) | 26’ | 186” |
| Minimum C.A. (Clear) | 28’ | 210” |
| Minimum C.A. (Clear) | 30’ *** | 234” |
| Minimum Frame Height | 40” – 46” | |
| Minimum Frame Requirement | 110,000 PSI with Inverted L-Frame * |
| Chassis Recommendations – 20 & 30 Series Tandem Axle ** | ||
|---|---|---|
| Minimum GVWR | 50,000 lb | |
| Minimum C.B. (Clear) | 24’ | 142” |
| Minimum C.B. (Clear) | 26’ | 166” |
| Minimum C.B. (Clear) | 28’ | 190” |
| Minimum C.B. (Clear) | 30’ *** | 214” |
| Frame Height | 40” – 46” | |
| Minimum Frame RBM (Each) Rail Tandem Axle | 20 Series | 2,500,000 in/lb |
| Minimum Frame RBM (Each) Rail Tandem Axle | 30 Series | 3,000,000 in/lb |
| Minimum Frame Length Behind Center of Rear Axle | 60” |
*All recommendation are minimums, heavier specifications may be required depending on chassis and equipment weight. Consult our sales staff for additional information and to pick the perfect chassis for this truck.
Inside platform width applies to optional removable rails.
* Reinforcement extended to the rear of the frame.
** A heavy duty build up kit is available on a single axle and is required for a 20 Series mounted on a tandem or with an additional axle.
*** Check state and local road restrictions for maximum vehicle lengths allowed.
Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. or Bressler’s, Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.
*MSRP listed is Miller Industries’ Suggested Retail Price for the body/equipment only. Amount shown does not include discounted sale price, chassis, installation, options, accessories, paint, freight, delivery, federal and local tax, state safety and emissions inspection, etc. All prices are subject to change without prior notice. For accurate quote on this or any equipment, please contact our sales department.
BUILT HERE.
BUILT RIGHT.
BUILT FOR YOU.
BRESSLERS BUILDS IT BETTER.
Bressler’s, Inc. builds American-Made wreckers, rollbacks and rotators, tailored to our customers’ individual needs. Check out these previous customer builds.
VIEW TRUCKS SIMILAR TO THIS Vulcan 20 & 30 Series Industrial Carrier
POPULAR
CARRIER
ACCESSORIES:
Michael Hunt
Wrecker Salesman
Interested in purchasing a Vulcan 20 & 30 Series Industrial Carrier?
Buying a new Vulcan 20 & 30 Series Industrial Carrier can be a daunting task. Our equipment sales staff has decades of experience helping customers like you make smart choices when it comes to chassis choice, truck specification, and picking the right options and accessories to get the job done.
Fill out the form below to reach out to our equipment sales staff. You can also Call Us or Send Us a Text.
Financing Available
We have long-term relationships with several finance partners who understand the unique characteristics of the towing and recovery industry. Interest rates on new wreckers are at an all-time low.
Enter your e-mail address below to explore finance options for your next towing equipment purchase. We do not sell your information, and will not run a credit check without your approval.
