Carrier Load Rating
12,000 lbs
Wheel Lift Rating:
4,000 lbs.
Winch Rating & Wire Rope:
8,000 lbs.
Vulcan 12 Series LCG Rollback
The LCG is the Best-Selling Rollback at Bressler’s, Inc.
Vulcan has added an entirely new dimension to the concept of transport, thanks to its 12 Series LCG™ carriers. Their patented design lowers the deck height by as much as 5” – 6” over that of conventional carriers.
The result is a better load angle, better stability during transport, the abiltiy to haul taller loads and increased operator safety because the operator can easily secure the load while standing safely on the ground.
Features:
Standard:
- Platform Available in Aluminum or Steel
- Floor Level Sides w/ Stake Pockets (Steel)
- Hollow Structural Side Rails (Aluminum)
- Right & Left Chain Trays
- Safety Chains (2 Front, 2 Rear)
- Painted in Black Acrylic Enamel (Steel)
- Left & Right Side Illuminated Controls
- Federal Standard #108 LED Lighting
- 8,000 lb Hydraulic Winch w/ 50’ Cable
- Full Function Wheel Lift System
- Slide-In L-Arms w/ Anti-Theft Storage
- Pre-Wired Electrical Junction Box
- Adjustable Rear Stabilizer
- Bed Built 102” Wide
- 11 Key Slot Package (Steel)
- 6 Key Slot Package (Aluminum)
- Slide Pads
- Bed Anti-Tilt Lockout
- Roller Bed Positive Lock-Down
- Two Lift Cylinders
- One Extension Cylinder
- Manual Shift Winch Clutch Release
- Back-Up Lights & Alarm
- Cable Tensioner
- Cable Roller Guide
- Tow Light Socket
- Mud Flaps
- Hydraulic Pump
- Lubrication Fittings on All Pivot Points
Optional:
- Frame-Mounted Pylon (Requires 6” or 12” Additional CA depending on size of pylon base)
- Bed-Mounted Cab Protector
- Smooth Floor in lieu of Tread Plate (Steel)
- Color on Top of Deck & Side Rails (Steel)
- Solid Tube Side Rails (Steel, N/C))
- Solid Narrow Profile Rails (Aluminum)
- Steel Removable Tube Rails
- Aluminum Removable Blade Rails
- SST® Option
- Extreme Angle (Steel)
- 9-Spool Control Station Capable
- Optional Planetary Winch
- Air Shift Winch Clutch Release
- Dual Air Shift Winch Clutch Release
- Side-Mount Winch
- Galvanized Subframe
- Wood Floor*
- 6 Key Slot Package (Aluminum)
- Additional Key Slots
- Wireless Winch Remote
- Work Lights (Rear, Pylon, or Winch Mounted)
- Additional Lighting
- Vulcan’s Patented Wheel Retainers
- 3-Way Pivoting L-Arm System
- Combination Dock Stabilizer / Wheel Lift
- Hydraulic Stabilizer w/ Extendable Pintle
- Various Wheel Retainer Options
- Auto-Grip™ II Wheel Lift
- Steel or Aluminum Tool Compartments
- Various Chain & Strap Assemblies
- PTO
- Switch Panel
- Stabilizer Spades
*N/A with the SST® or Right Approach™ Option
Bold text denotes popular options suggested by Bressler’s, Inc.
Specifications:
| Carrier | ||
|---|---|---|
| Load Rating* | 12,000 lbs. | |
| Platform Length | 20.5’, 21’, 21.5’, 22’ | |
| Platform Floorplate Thickness | 3/16” | |
| Platform Width (Outside) | 102” | |
| Platform Width (Inside)** | 96.5” to 101” | |
| Platform Mainbeam | 6” I-Beam | |
| Platform Crossmembers (Steel) | 2” x 2” Cor-ten Tube | |
| Platform Crossmembers (Aluminum) | 2 1/4” | |
| Crossmember Spacing (Steel) | 8” on Center | |
| Crossmember Spacing (Aluminum) | 4” on Center | |
| Subframe Rails | 5” x 3” x 5/16” H.S. Tube | |
| Rear Pivot | 1 Piece 1 1/2” Diameter | |
| Winch (1st Layer) | 8,000-lbs. Worm | |
| Cable | 3/8” x 50’ | |
| Bed Tilt Cylinders | 3” Bore | |
| Bed Extension Cylinder | 3 1/2” x 120” Stroke | |
| Wheel Lift Reach (Extended) | 66” | |
| Wheel Lift Rating (Extended) | 4,000 lbs. | |
| Tow Rating | 10,000 lbs. | |
| Deck Height Above Chassis Frame (Steel) | 6.75” | |
| Deck Height Above Chassis Frame (Wood) | 7.75” | |
| * Platform rating is based on equally distributed load | ||
| ** Inside Bed Widths will vary based on Siderail Option |
| Cab to Axle (C.A.) Requirements | ||
|---|---|---|
| Carrier Length | Clear C.A. | Minimum Frame RBM |
| FMP Add 6″ | – | – |
| 20.5’ | 132” | 600,000 in/lbs. |
| 21’ | 138” | 600,000 in/lbs. |
| 21.5‘ | 144” | 600,000 in/lbs. |
| 22’ | 150” | 600,000 in/lbs. |
| Chassis Recommendations | ||
|---|---|---|
| GVWR | 19,500 lbs. – 26,000 lbs. | |
| Minimum Frame Length Behind Center of Rear Axle | 36” | |
| Minimum Frame Height | 33” | |
| Maximum Frame Height | 38” | |
| Wheel & Tire Size* | 245/70R 19.5″ | |
| Wheel & Tire Size* | 255/70R 22.5″ |
*All recommendation are minimums, heavier specifications may be required depending on chassis and equipment weight. Consult our sales staff for additional information and to pick the perfect chassis for this truck.
Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. or Bressler’s, Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.
*MSRP listed is Miller Industries’ Suggested Retail Price for the body/equipment only. Amount shown does not include discounted sale price, chassis, installation, options, accessories, paint, freight, delivery, federal and local tax, state safety and emissions inspection, etc. All prices are subject to change without prior notice. For accurate quote on this or any equipment, please contact our sales department.
BUILT HERE.
BUILT RIGHT.
BUILT FOR YOU.
BRESSLERS BUILDS IT BETTER.
Bressler’s, Inc. builds American-Made wreckers, rollbacks and rotators, tailored to our customers’ individual needs. Check out these previous customer builds.
VIEW TRUCKS SIMILAR TO THIS Vulcan 12 Series LCG Rollback
POPULAR
CARRIER
ACCESSORIES:
Michael Hunt
Wrecker Salesman
Interested in purchasing a Vulcan 12 Series LCG Rollback?
Buying a new Vulcan 12 Series LCG Rollback can be a daunting task. Our equipment sales staff has decades of experience helping customers like you make smart choices when it comes to chassis choice, truck specification, and picking the right options and accessories to get the job done.
Fill out the form below to reach out to our equipment sales staff. You can also Call Us or Send Us a Text.
Financing Available
We have long-term relationships with several finance partners who understand the unique characteristics of the towing and recovery industry. Interest rates on new wreckers are at an all-time low.
Enter your e-mail address below to explore finance options for your next towing equipment purchase. We do not sell your information, and will not run a credit check without your approval.
