Century Towing Equipment Logo

Century 20 & 30 Series Industrial Carrier


$39,000 –

Century Towing Equipment Logo

Carrier Load Rating

20k-30k lbs

Wheel Lift/Tow Bar Rating:

3,500-5000 lbs.

Winch Rating & Wire Rope:

8k-20k lbs.

Century 20 & 30 Series Industrial Carrier

Deliver with Confidence

Century’s 20 & 30 series carriers have long set the industry standard for hauling heavy equipment. At Century, we believe that providing you with the best equipment with a variety of options allows you to customize your equipment for your needs.

Options such as: various deck lengths, apitong flooring, container packages, and additional key slots make your hauling and load combinations virtually unlimited. In addition, our durable design provides you with the comfort of knowing that your equipment will be reliable for years to come. For more information on how adding a Century 20 or 30 series carrier to your fleet can increase your transporting capabilities, visit your local Century distributor.



  • Consolidated Tilt & Full Length Mounting Frame
  • Full Length Nylatron Slide Pads
  • Painted w/Black Acrylic Urethane
  • Driver’s & Passenger Side Chain Trays
  • Two Front Safety Chains
  • Positive Lock-Down System
  • Hydraulic Winch & Cable
  • Dual Illuminated Controls
  • Winch Clutch Release
  • Back-Up Alarm
  • Bed Anti-Tilt Feature
  • Hydraulic Pump
  • Dual Lift Cylinders
  • Mud Flaps
  • One Extension Cylinder
  • Federal Standard 108 Lighting
  • Hydraulic Dock Stabilizer

Standard – 20 Series Only:

  • Winch Cable Tensioner
  • Six Tie-Down Points (2 Front, 4 Rear)
  • Slide in L-Arms
  • Safety Chains
  • Wheel Straps

Standard – 30 Series Only:

  • 20,000 lb Planetary Winch with Air Free-Spool
  • 6” on Center Crossmember Spacing
  • 12 Tie-Down Points (4 Per Side, 4 Rear)
  • Steel Tube Cab Protector


  • Removable Side Rails
  • Wire Mesh in the Cab Protector
  • Outside Stake Pockets w/Rub Rails & Pipe Spools
  • Aluminium Chain Trays (for Stationary Cab Protector)
  • Tool Compartments
  • Locking Chain Rack
  • PTO
  • Drop Wheel Wells on Deck
  • Smooth Floor in Lieu of Diamond Plate
  • Switch Panel
  • 1/4” Steel Floor
  • Work Area & Emergency Lighting
  • Apitong Wood Floor
  • Optional Color on Top of Deck & Side Rails
  • Rumber Floor
  • Winch Cage
  • Dual Key Slots Down Center or Deck Edge
  • Wired or Wireless Winch Remote
  • Additional D-Rings
  • Winch Bumper Stops
  • Stationary Cab Protector (Requires 10” Additional CA)

Optional – 20 Series:

  • Steel Tube Cab Protector
  • Independent Hydraulic Stabilizer in Lieu of Wheel Lift
  • 6” On Center Crossmember Spacing
  • Heavy Duty Build-Up Kit (Includes Additional Crossmembers & 5” Lift Cylinders)
  • 12,000 lb Worm Gear Winch
  • 12,000 lb or 20,000 lb Planetary Gear Winch
  • Trailer Ball Kit for Independent Wheel Lift

Century’s 20 & 30 series decks are available with an optional Apitong wood floor, in place of the standard diamond steel floor plate. Optional dual row key slots down the center of the floor, as well as key slots and lashing rings along the deck edge, also available.


Component20 Series30 Series
Load Rating20,000 lb30,000 lb
Platform Length24’, 26‘, 28’, 30’24’, 26‘, 28’, 30’
Platform Thickness3/16”3/16”
Platform Width (Outside)102”102”
Platform Width (Inside)98”98”
Platform Mainbeam6” I-Beam8” I-Beam
Platform Crossmembers2” x 4” Cor-ten Steel2” x 4” Cor-ten Steel
Crossmember Spacing8” on Center6” on Center
Platform Sides7” x 4” Angle w/ 24” C/C Pockets7” x 4” Angle w/ 24” C/C Pockets
Subframe5” x 4” x 3/8” Tube7” x 4” x 3/8” Tube
Rear Pivot1 Piece 2” Diameter1 Piece 2” Diameter
Winch (First Layer)8,000 lb Worm Gear20,000 lb Planetary Gear
Cable3/8” x 50’9/16” x 100’
Power Lift Cylinders4 1/2” x 32” Stroke5” x 32” Stroke
Extension Cylinder4 1/2” x 120” Stroke5” x 120” Stroke
Wheel Lift Rating3,500 lbNot Applicable
Optional Tow Bar Rating5,000 lbNot Applicable
Chassis Recommendations – 20 Series Single Axle
Minimum GVRW50,000 lb
Minimum C.A. (Clear)24’162”
Minimum C.A. (Clear)26’186”
Minimum C.A. (Clear)28’210”
Minimum C.A. (Clear)30’ ***234”
Minimum Frame Height40” – 46”
Minimum Frame Requirement110,000 PSI with Inverted L-Frame *
Chassis Recommendations – 20 & 30 Series Tandem Axle **
Minimum GVWR50,000 lb
Minimum C.B. (Clear)24’142”
Minimum C.B. (Clear)26’166”
Minimum C.B. (Clear)28’190”
Minimum C.B. (Clear)30’ ***214”
Frame Height40” – 46”
Minimum Frame RBM (Each) Rail Tandem Axle20 Series2,500,000 in/lb
Minimum Frame RBM (Each) Rail Tandem Axle30 Series3,000,000 in/lb
Minimum Frame Length Behind Center of Rear Axle60”

*All recommendation are minimums, heavier specifications may be required depending on chassis and equipment weight. Consult our sales staff for additional information and to pick the perfect chassis for this truck.

Inside platform width applies to optional removable rails.

* Reinforcement extended to the rear of the frame.

** A heavy duty build up kit is available on a single axle and is required for a 20 Series mounted on a tandem or with an additional axle.

*** Check state and local road restrictions for maximum vehicle lengths allowed.

Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. or Bressler’s, Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.

*MSRP listed is Miller Industries’ Suggested Retail Price for the body/equipment only. Amount shown does not include discounted sale price, chassis, installation, options, accessories, paint, freight, delivery, federal and local tax, state safety and emissions inspection, etc. All prices are subject to change without prior notice. For accurate quote on this or any equipment, please contact our sales department.

VIEW TRUCKS SIMILAR TO THIS Century 20 & 30 Series Industrial Carrier

Equipment IN STOCK NOW: