Carrier Load Rating
12,000 lbs
Wheel Lift Rating:
4,000 lbs.
Winch Rating & Wire Rope:
8,000 lbs.
Century 12 Series LCG Rollback
The Century LCG is the Best-Selling Rollback at Bressler’s, Inc.
Century brings a whole new dimension to transport with the 12 Series LCG™ (Low Center of Gravity) carrier. The Century LCG patented design lowers the deck height 5” – 6” over conventional carriers. The lower height allows for the transport of taller loads, such as forklifts or man-lifts, that may be over-height on a conventional carrier and also provides better stability during transport.
The operator can easily secure loads or tie down vehicles while standing on the ground, thanks to the lower height. When mounted on most air ride chassis, with the air dumped, the 12 Series LCG™ has less than an 11-degree load angle, making it ideal for loading low-clearance vehicles or equipment without using ramps or wood. For fast and easy unloading of damaged vehicles or equipment, the Century LCG™ has a 20-degree dump angle. Your new 12 Series LCG™ is available in 20.5’, 21’, 21.5’, and 22’ deck lengths with a capacity of 12,000 lb and a wide variety of options to fit your specific transport needs.
Features:
Standard:
- Platform Available in Aluminum or Steel
- Floor Level Sides w/ Stake Pockets (Steel)
- Hollow Structural Side Rails (Aluminum)
- Right & Left Chain Trays
- Safety Chains (2 Front, 2 Rear)
- Painted in Black Acrylic Enamel (Steel)
- Left & Right Side Illuminated Controls
- Federal Standard #108 LED Lighting
- 8,000 lb Hydraulic Winch w/ 50’ Cable
- Full Function Wheel Lift System
- Slide-In L-Arms w/ Anti-Theft Storage
- Pre-Wired Electrical Junction Box
- Adjustable Rear Stabilizer
- Bed Built 102” Wide
- 11 Key Slot Package (Steel)
- 6 Key Slot Package (Aluminum)
- Slide Pads
- Bed Anti-Tilt Lockout
- Roller Bed Positive Lock-Down
- Two Lift Cylinders
- One Extension Cylinder
- Manual Shift Winch Clutch Release
- Back-Up Lights & Alarm
- Cable Tensioner
- Cable Roller Guide
- Tow Light Socket
- Mud Flaps
- Hydraulic Pump
- Lubrication Fittings on All Pivot Points
Optional:
- Frame-Mounted Pylon (Requires 6” or 12” Additional CA depending on size of pylon base)
- Color on Top of Deck & Side Rails (Steel)
- Right Approach™ Option (Steel)
- SST® Option
- Smooth Floor in lieu of Tread Plate (Steel)
- Solid Tube Side Rails (Steel, N/C))
- Steel Removable Tube Rails
- Aluminum Removable Blade Rails
- Wireless Winch Remote
- Steel or Aluminum Tool Compartments
- Work Lights (Rear, Pylon, or Winch Mounted)
- Various Chain & Strap Assemblies
- Combination Dock Stabilizer / Wheel Lift
- Hydraulic Stabilizer w/ Extendable Pintle
- 8,000 lb Planetary Winch
- Bed-Mounted Cab Protector
- Galvanized Subframe
- 6 Key Slot Package (Aluminum)
- Additional Key Slots
- Auto-Grip™ II Wheel Lift
- Wood Floor*
- Rumber Flooring
- PTO
- Switch Panel
- Emergency Lighting
- Century 3-Way Pivot & Other Wheel Retainer Options
- Side-Mount Winch
*N/A with the SST® or Right Approach™ Option
Bold text denotes popular options suggested by Bressler’s, Inc.
Specifications:
| Carrier | ||
|---|---|---|
| Load Rating* | 12,000 lbs. | |
| Platform Length | 20.5’, 21’, 21.5’, 22’ | |
| Platform Floorplate Thickness | 3/16” | |
| Platform Width (Outside) | 102” | |
| Platform Width (Inside)** | 96.5” to 101” | |
| Platform Mainbeam | 6” I-Beam | |
| Platform Crossmembers (Steel) | 2” x 2” Cor-ten Tube | |
| Platform Crossmembers (Aluminum) | 2 1/4” | |
| Crossmember Spacing (Steel) | 8” on Center | |
| Crossmember Spacing (Aluminum) | 4” on Center | |
| Subframe Rails | 5” x 3” x 5/16” H.S. Tube | |
| Rear Pivot | 1 Piece 1 1/2” Diameter | |
| Winch (1st Layer) | 8,000-lbs. Worm | |
| Cable | 3/8” x 50’ | |
| Bed Tilt Cylinders | 3” Bore | |
| Bed Extension Cylinder | 3 1/2” x 120” Stroke | |
| Wheel Lift Reach (Extended) | 66” | |
| Wheel Lift Rating (Extended) | 4,000 lbs. | |
| Tow Rating | 10,000 lbs. | |
| Deck Height Above Chassis Frame (Steel) | 6.75” | |
| Deck Height Above Chassis Frame (Wood) | 7.75” | |
| * Platform rating is based on equally distributed load | ||
| ** Inside Bed Widths will vary based on Siderail Option |
| Cab to Axle (C.A.) Requirements | ||
|---|---|---|
| Carrier Length | Clear C.A. | Minimum Frame RBM |
| FMP Add 6″ | – | – |
| 20.5’ | 132” | 600,000 in/lbs. |
| 21’ | 138” | 600,000 in/lbs. |
| 21.5‘ | 144” | 600,000 in/lbs. |
| 22’ | 150” | 600,000 in/lbs. |
| Chassis Recommendations | ||
|---|---|---|
| GVWR | 19,500 lbs. – 26,000 lbs. | |
| Minimum Frame Length Behind Center of Rear Axle | 36” | |
| Minimum Frame Height | 33” | |
| Maximum Frame Height | 38” | |
| Wheel & Tire Size* | 245/70R 19.5″ | |
| Wheel & Tire Size* | 255/70R 22.5″ |
*All recommendation are minimums, heavier specifications may be required depending on chassis and equipment weight. Consult our sales staff for additional information and to pick the perfect chassis for this truck.
Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. or Bressler’s, Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.
*MSRP listed is Miller Industries’ Suggested Retail Price for the body/equipment only. Amount shown does not include discounted sale price, chassis, installation, options, accessories, paint, freight, delivery, federal and local tax, state safety and emissions inspection, etc. All prices are subject to change without prior notice. For accurate quote on this or any equipment, please contact our sales department.
BUILT HERE.
BUILT RIGHT.
BUILT FOR YOU.
BRESSLERS BUILDS IT BETTER.
Bressler’s, Inc. builds American-Made wreckers, rollbacks and rotators, tailored to our customers’ individual needs. Check out these previous customer builds.
VIEW TRUCKS SIMILAR TO THIS Century 12 Series LCG Rollback
- In-Progress
2022 International MV-X – Century LCG-12 Aluminum Carrier
STOCK NUMBER: 10580
YEAR: 2022
MILEAGE:
MSRP:
123,357.73
- In-Progress
2022 International MV – Vulcan LCG-12 Carrier
STOCK NUMBER: 10579
YEAR: 2022
MILEAGE:
MSRP:
110,929.26
POPULAR
CARRIER
ACCESSORIES:
Michael Hunt
Wrecker Salesman
Interested in purchasing a Century 12 Series LCG Rollback?
Buying a new Century 12 Series LCG Rollback can be a daunting task. Our equipment sales staff has decades of experience helping customers like you make smart choices when it comes to chassis choice, truck specification, and picking the right options and accessories to get the job done.
Fill out the form below to reach out to our equipment sales staff. You can also Call Us or Send Us a Text.
Financing Available
We have long-term relationships with several finance partners who understand the unique characteristics of the towing and recovery industry. Interest rates on new wreckers are at an all-time low.
Enter your e-mail address below to explore finance options for your next towing equipment purchase. We do not sell your information, and will not run a credit check without your approval.
